[WriteLog] Windows ME

Larry Benko benko@aztek-eng.com
Fri, 01 Jun 2001 18:26:02 -0600


Bill,

Not quite correct.  The status of the DTR and RTS leads has
changed from inactive in Win98 to active in WinME ONLY DURING
BOOTUP.  Afterwards all is the same.  Problem is that without
extrnal cutoff switch, rig keys during boot and then all is OK.

See:
http://support.microsoft.com/support/kb/articles/Q285/8/94.ASP?LN=EN-US&SD=gn&FR=0&qry=serial%20port%20DTR&rnk=2&src=DHCS_MSPSS_gn_SRCH&SPR=WINME

Microsoft is aware of the problem, has a fix, but wants you to
pay for it.

73,
Larry, W0QE

FireBrick wrote:
> 
> Did I read correctly that the high/low state of com ports is changed
> when you install Windows ME?
> If so, that will cause station control to be inoperative. Is that
> correct.
> 
> ------------------------------------------------------------
> In any collection of data, the figure most obviously correct, beyond all
> need of checking, is the mistake.
> ------------------------------------------------------------
> 
> Bill H. in Chicagoland
> w9ol@billnjudy.com   FireBrick@telocity.com   w9ol@telocity.com
> 
> --
> WWW:                      http://www.writelog.com/
> Submissions:              writelog@contesting.com
> Administrative requests:  writelog-REQUEST@contesting.com
> Problems:                 owner-writelog@contesting.com

--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com