[WriteLog] FT-1000D

[PETER BARRON]

Have you tried a full reset of the processor
With rig off
Press and hold 1.5 and 7 MHZ band keys whilst pressing power ON
This tests display, & uP etc
Or
With power off
Press and hold SUB and ENT keys whilst pressing power ON
This resets memories etc

Good luck
Peter A Barron
ve3pn@igs.net

 -----Original Message-----
From: 	writelog-admin@contesting.com [mailto:writelog-admin@contesting.com]
On Behalf Of Courtney Judd - K4WI
Sent:	Tuesday, October 30, 2001 2:00 AM
To:	Writelog Relector; SECC Relector; DX4WIN Reflector
Subject:	[WriteLog] FT-1000D

If things weren't bad enough, turned the 1000D off after a flawless
performance all weekend. Turned it back on this morning and only the S-meter
lights and clicking sounds are heard. Nothing I unplug or press changes this
behavior. Before I call Yaesu, anybody have any ideas ( 1993 model bought
new.. Manuel says something about a battery only good for 5 years). Hope
this doesn't double up on you all too many times from different reflectors
but I would appreciate any info... SS is around the corner!!! Thanks Cort
Courtney Judd K4WI
       ex-K4JYO
check out www.k4wi.net