[WriteLog] Serial Ports AGAIN!

[Jim]

As the post states.....

The serial card is made my Equinox. They are high dollar ($ 250.00+) cards
that were used in a windows NT machine.  HOWEVER, the driver set includes a
set for windows 95/98. The card fits into an ISA slot. There is a large
connector that plugs into the board that has 4 DB25 or DB9 (I have both
cables) connectors on the end.

These are set up as COM3 through COM6

Thanks
Jim W7RY

----- Original Message -----
From: Steve Baron - KB3MM <SteveBaron@StarLinX.com>
To: Jim <w7ry@earthlink.net>
Sent: Thursday, January 03, 2002 10:03
Subject: Re: [WriteLog] Serial Ports AGAIN!


| What kind of card/ports are they ?
|
| ----- Original Message -----
| From: "Jim" <w7ry@earthlink.net>
| To: <WriteLog@contesting.com>
| Sent: Thursday, January 03, 2002 16:03
| Subject: [WriteLog] Serial Ports AGAIN!
|
|
| > I have tried unsuccessfully to use an Equinox 4 port serial card with
| > Writelog. (6 serial ports total). The program will just not recognize
| them.
| > I know the ports are working because I can use them with ProComm + for
| > Windows on the same machine.
| >
| > What's the deal with Writelog and the difficulty with serial ports ?
| >
| > All I need is 3 serial ports...1-Rig   2-TNC for packet    3-RTTY TU.
(Hal
| > ST-8000)
| >
| > Thanks and 73!
| > Jim W7RY
| >
| >
| >
| > _______________________________________________
| > WriteLog mailing list
| > WriteLog@contesting.com
| > http://lists.contesting.com/mailman/listinfo/writelog
| >
| >
|