[WriteLog] PK232..No Packet on COM7..solved..sort of

Eric - VE3GSI ve3gsi@sympatico.ca
Tue, 11 Jun 2002 22:35:50 -0400


Dave,
It is because the PK232 does not want you to use certain pins on the serial
cable. It seems to me those pins are reserved for WeFAX (others can verify
this if they wish).  So if you are using a 'fully' populated serial cable,
it is possible for the cable/TNC/computer combination to fail.

In the AEA manual it does specify to use serial cables with pins 1-8 and 20
only.

Remember too, not all COM ports are fully populated on some computers so it
is possible to use a fully populated cable with those systems.

73 from Canada.
Eric
ve3gsi@canada.com



----- Original Message -----
From: "Dave" <nr1dx@arrl.net>
To: <writelog@contesting.com>
Sent: Tuesday, June 11, 2002 10:00 PM
Subject: [WriteLog] PK232..No Packet on COM7..solved..sort of


> About a week ago, I posted that I could not get my PK232 to play as a
> packet TNC on COM7 , but it worked on that port in DX4WIN. Later I found
> that i could not get Writelog to recognize the PK232 on any COM port COM 5
> or higher ( I have up to COM10). Writelog did however recognize the PK232
> if it was on COM3 or COM4 just fine. All COM ports COM3-COM 10 are the
same
> manufacturer (SiiG)
>
> The TNC sits way over on left out of the way and the computer is on the
> floor just to the right of my chair. There are two shielded cables in the
> line on a 12' run cable ( computer ...6ft DB-9 /DB-25 .+ 6ft DB-25/DB-25
> ...PK232).
>
> Tonight I isolated the problem to the DB-25/DB-25 extension cable...I
> think. Detection was pure luck.I have a 2nd PK232 sitting on the shelf
that
> I was checking out this evening in preparation for getting ready to sell
> it.  I had hooked it to COM4 when as an afterthought thinking my above
> mentioned problem might be  a problem with the PK232 and not Writelog. So
I
> hooked it to COM 7 and sure enough it played just fine under Writelog.
Next
> I changed out he cables to PK232 #1 and it too now played just fine on
> COM7. I ohmed out the DB-25/DB-25 and it was just fine pin for pin.
>
> So puzzle fans what is it about this cable that COM5-COM10 and writelog
> don't like...any theorys?
>
>
>
> Dave
> NR1DX
> nr1dx@arrl.net
>
> "A man who picks a cat up by the tail learns a lesson he can learn no
other
> way" .... Mark Twain
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>