[WriteLog] Setting up ports

[Darack, Zev]

You can only use 4 com ports with WriteLog and which 4 depends on the
settings in the ini file.
[Ports]
CommSlot1=1
CommSlot2=2
CommSlot3=3
CommSlot4=4
COM1:=9600,n,8,1
COM2:=9600,n,8,1
COM3:=9600,n,8,1
COM4:=9600,n,8,1

If you change the settings in the ini file you will be able to access your
rigblaster on com 6.  The "CommSlotx=x" line may need to be added to your
ini file because it does not exist by default.

73,
Zev Darack N2WKS

 -----Original Message-----
From: 	Raymond W Brann [mailto:w1rwb@midcoast.com] 
Sent:	Monday, June 17, 2002 1:41 PM
To:	writelog@contesting.com
Subject:	[WriteLog] Setting up ports

Hi, Using 1022b and trying to set up CW keying.
I have my interface (rigblaster) on Com 6 (don't want to change this)
and will try to use this for sending CW. As you know only com 1 thru 4
are shown in the port setup.
So what to do now??
Hope you folks can help
Many Thanks
73
Ray / W1RWB


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog