[WriteLog] W5XD Keyer & USB Connection REPLIES

[Greg Fischer]

I would think this the logical way to go.  Especially with all the PTT/CW
keying setup problems I see popping up all the time.  One USB and thats it
for everything.  I may order one and just use MixW for everything, though I
am waiting to hear back from Dennis at LoGic (PDA) to see if he can
implement it.  I would not think it would be that hard...If they can do it
in MixW, should be able to support it in other programs as well. MixW would
probably support any interfacing questions for other programmers too as it
would probably sell alot more of the interfaces.  Who knows.

73
Greg
AB7R


-----Original Message-----
From: writelog-bounces at contesting.com
[mailto:writelog-bounces at contesting.com]On Behalf Of Doug Faunt N6TQS
+1-510-655-8604
Sent: Monday, December 08, 2003 11:20 AM
To: ab7r at direcway.com
Cc: GW4BLE at btinternet.com; writelog at contesting.com; gw3njw at onetel.net.uk
Subject: Re: [WriteLog] W5XD Keyer & USB Connection REPLIES


I've got one of these ordered, and even with only MixW support it'll
be useful.  But I agree that having support for it in MMTTY and WL
would be a real winner.  I know I've posted here about it.
Who else can we push on?

73, doug

   Date: Mon, 08 Dec 2003 11:01:50 -0800
   From: Greg Fischer <ab7r at direcway.com>

   There is a new USB interface box that looks great by MixW, called MixW
Rig
   expert.  No longer need the computer's internal sound card and provides
CAT,
   PTT and CW all from one USB port.  Unfortunately, as of now WL does not
plan
   to support it.  Maybe if enough people ask, they might.

   It's a little pricey at $200, but a nice all-in-one solution.  I would
   probably get one if WL and MMTTY supported it.

   http://www.mixw.cjb.net/

   73
   Greg
   AB7R


   -----Original Message-----
   From: writelog-bounces at contesting.com
   [mailto:writelog-bounces at contesting.com]On Behalf Of Clive Whelan
   Sent: Monday, December 08, 2003 8:32 AM
   To: writelog at contesting.com
   Cc: GW4BLE
   Subject: [WriteLog] W5XD Keyer & USB Connection REPLIES


   [ QSP from GW4BLE]


   Thanks to everyone who replied on this topic of a week or so ago.  Most
also
   copied direct to the reflector which is most appreciated.

   Consensus appears to be, that although *rig* control via USB should be
fine
   there is no guarantee of this being the case for keyer command timing and
   that currently a single serial port should be used, although USB 2.0
*might
   * be acceptable.

   Fortunately, my recently ordered new PC, has a single serial port (plus
PCI
   expansion for more) so until such time that USB<>serial connection
transfers
   are improved I should be OK  ;-)


   73

   Steve
   GW4BLE





   _______________________________________________
   WriteLog mailing list
   WriteLog at contesting.com
   http://lists.contesting.com/mailman/listinfo/writelog
   WriteLog on the web:  http://www.writelog.com/


   _______________________________________________
   WriteLog mailing list
   WriteLog at contesting.com
   http://lists.contesting.com/mailman/listinfo/writelog
   WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/