[WriteLog] bandmap timing

[Eric Scace K3NA]

   Check the Help file's section on the INI file.  There you will find the name of the parameter which you can adjust for the number
of seconds that the bandmap entry will be displayed.

   There is a similar entry for the packet spot window.

-- Eric K3NA

-----Original Message-----
From: writelog-bounces at contesting.com
[mailto:writelog-bounces at contesting.com]On Behalf Of Jim Jarvis
Sent: 2003 December 16 22:20
To: writelog at contesting.com
Subject: [WriteLog] bandmap timing



This may be a dumb question...but how do I set the
amount of time which spots are allowed to dwell on the
bandmap?   In the point & click mode, it sometimes is
beneficial for mults not to go away for a longer time
than what is programmed.

I noticed this many times in CW, where the pileups were
large and I couldn't break the pileup with my 80m dipole...
I'd want to recursively revisit the mult, until things
thinned out a bit.  Several times, they timed-out of the
window.

This is a comment, as I don't believe there's a setting:
...I noticed a need to fix the center frequency
of the display.  Often, when pointing/clicking, the display
would dither just as I was clicking on a spot.  The result
was the radio going somewhere other than intended.  Not
clear why.

At the same time, there was no reason for the bandmap to
reposition itself.  In most cases, it can be fixed on the
appropriate mode, and cover the necessary range.

n2ea

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/