[WriteLog] WriteLog, shared IRQs and COM ports
Clive Whelan
gw3njw@onetel.net.uk
Tue, 07 Jan 2003 19:16:29 -0000
Eric
> I have access to a computer with lots of COM ports, but some of these ports share IRQs. WinXP Pro is the operating system. Has
> anyone used WriteLog with COM ports under shared IRQs? My understanding of how this works at an operating system and application
> level is pretty murky.
>
I am doing just that, and it works fine. In fact I was extremely puzzled that on installation
, the PCI serial port card ( ITe), the on board sound card, and the on board ( PC Chips) ethernet
were all sharing IRQ11, but no conflicts were reported. In fact the serial port card did not work at first, but on
disabling the network in the BIOS it did then work. On re-enabling the network, all three co-existed despite the fact that
apparently none of the IRQs had changed, and there appeared to be a conflict, although XP didn't think so.
This appears to be pure black magic, and I have given up trying to understand it, and just rejoice!
73
Clive
GW3NJW