[WriteLog] WriteLog, shared IRQs and COM ports

Ron Stordahl Ron Stordahl" <ron.stordahl@digikey.com
Tue, 7 Jan 2003 14:22:05 -0600


PCI  cards and interupt sharing have solved the conflict problems.  I have 2
4-port Byterunner PCI cards( which also each include 1 printer port), so
including the on board serial ports I have a total of 10 com ports and the 8
Byterunner ports plus 2 LPT ports all use the same IRQ-11 (plus I believe my
sound card and my network card!).  I have unused IRQ's!   I have tested this
with both Windows ME and Windows XP.

Ron N5IN


----- Original Message -----
From: "Clive Whelan" <gw3njw@onetel.net.uk>
To: "Eric Scace K3NA" <eric@k3na.org>; "WriteLog" <writelog@contesting.com>
Sent: Tuesday, January 07, 2003 1:16 PM
Subject: Re: [WriteLog] WriteLog, shared IRQs and COM ports


>
>
>
> Eric
>
>
>
> > I have access to a computer with lots of COM ports, but some of these
ports share IRQs.  WinXP Pro is the operating system.  Has
> > anyone used WriteLog with COM ports under shared IRQs?  My understanding
of how this works at an operating system and application
> > level is pretty murky.
> >
>
>
> I am doing just that, and it works  fine. In fact I was extremely puzzled
that on installation
> , the PCI serial port card ( ITe), the on board sound card, and the on
board ( PC Chips) ethernet
> were all sharing IRQ11, but no conflicts were reported. In fact the serial
port card did not work at first, but on
> disabling the network in the BIOS it did then work. On re-enabling the
network, all three co-existed despite the fact that
> apparently none of the IRQs  had changed, and there appeared to be a
conflict, although XP didn't think so.
>
> This appears to be pure black magic, and I have given up trying to
understand it, and just rejoice!
>
>
> 73
>
>
>
> Clive
> GW3NJW
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>