[WriteLog] Update on FT-1000MP and recorded frequency

[dl6jz at t-online.de]

Hi Scott,

you are right. I am sure that I read somewhere (it was long ago so that
I don't remember where) that the rig control of WriteLog controls the
VFO A of FT-1000MP only. So you may not say that the FT-1000 interface
is broken.

But supporting both VFO's would be nice for those hams who don't want
to operate with two radios but want to use the full capability of an
MP.

73 + 55
Wolf, DL6JZ


Scot Herrick wrote:
> All,
> 
> Wayne provided a challenge to tell him where the
> interface with the Yaesu is
> broken (and I'm not sure it is...). I did some testing
> tonight and here is
> what I found:
> 
> - RX and TX on VFO A. Records in the log and shows on the
> radio button on
> the Entry Window the frequency and mode from VFO A.
> 
> - RX on VFO A and VFO B and TX on VFO B. Records in the
> log and shows on the
> radio button on the Entry Window the frequency from VFO
> A. So if VFO A is on
> 21005 and VFO B is RX and TX on VFO B is on 14002, then
> logged frequency is
> 21005 on VFO A.
> 
> - Split on 40 meters with LSB on 7167 and VFO B on 7013
> shows the mode of
> VFO A and frequency of VFO A 7167.
> 
> I tried a couple of other things, but the net of it is
> that the logged
> frequency and mode for WriteLog is what is RX on VFO A.
> 
> Is that what we are looking for or is there something
> different?
> 
> Thanks...Scot, K9JY
> See K9JY's WriteLog User Support Site at:
> http://www.k9jy.com
> mailto:scot at k9jy.com
> 
> 
> 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>