[WriteLog] Severe:V10 Not Installed

[Don Hill AA5AU]

It could be that something was corrupted by McAfee.  Also, you should ALWAYS reboot
your machine after installing a 3rd party module, or plug-in or any upgrade of WriteLog.
If you don't, you are likely to get an error if you try installing another upgrade.  For instance,
let say you do an upgrade of WriteLog to the new version, then try to install the MMTTY-plug in.
You will get an error.

There are problems with installing the MMTTY plug-in on some machine that run the McAfee
Anti-Virus software.  These problems are well documented in a page written by Mike, KH6ND,
and placed on my WriteLog website.  See the MMTTY Troubleshooting Guide (page 7)
for the link to Mike's excellent writeup along with other MMTTY troubleshooting help.

www.geocities.com/writelog

73, Don

----- Original Message -----
From: "W1CX" <w1cx at earthlink.net>
To: "writelog" <writelog at contesting.com>
Sent: Monday, January 27, 2003 9:41 AM
Subject: [WriteLog] Severe:V10 Not Installed


I found the cause of the above error message. I asked about it here on the reflector and it appears that again I have had a problem
no one has ever heard of before.

The error appeared when I tried to install the third party plugin to integrate mmtty into writelog. The clue came when it appeared
again when I tried to install v10.38upg over the v10.24gFULL.

Now it's simple. Something was corrupt in the underlying full version and other programs could not find it. This, even though I was
running the program and making contacts with it. Maybe this happened in a hard drive defragging or who knows.

I hope this helps others.
Loyd, w1cx
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog