[WriteLog] Icom 746 Pro Control

[Georgek5kg at aol.com]

In a message dated 11/11/2003 10:50:47 PM Eastern Standard Time, 
sroyle at bellsouth.net writes:

> I set the port to com 1, Icom 746 for the radio, and polling.
> I set both the computer and the radio to 9600 baud.  No matter what I do I
> cannot get Writelog to read the frequency from my radio or get it to change
> the frequency of my radio. 

To make the 746Pro to work with WL:
1.)  Set the CI-V address in the 746Pro to "5ch"
2.)  CI-V Baud Rate to "9600"
3.)  CI-V Transceive to "ON"
4.)  In WL, SETUP I PORTS, select Rig Type as "Icom 756PRO", POLL checked, 
CommPTT=YES.
5.)  Connect K1NU cable from the comm port you have selected to REMOTE on 
746PRO.

Pse let me know if you still need help.

73, Geo...

George I. Wagner, K5KG
Productivity Resources LLC
941-312-9450
941-312-9460 fax
941-400-1960 cell