[WriteLog] Fw: M2 Orion OR-2800 Rotor V10.42C

[Jim W7RY]

Sorry... Forgot to add...

Running Version 10.42C

Thanks again
Jim W7RY


----- Original Message ----- 
From: "Jim W7RY" <w7ry at centurytel.net>
To: "Jim W7RY" <w7ry at centurytel.net>; <writelog at contesting.com>
Sent: Tuesday, October 28, 2003 9:39 PM
Subject: Re: [WriteLog] Fw: M2 Orion OR-2800 Rotor


> More troubleshooting....
>
> I hooked the rotor port to another port and monitored the data...
>
> Looks like Writelog is not sending a carriage return when the heading is
> sent.
>
> All that is send is the heading. Albeit 1, 2, or 3 digits long. The rotor
> will respond to 1, 2, or 3 digit directions. But it MUST have a carriage
> return to act on the heading sent.
>
> Any ideas?
> Thanks and 73
> Jim W7RY
>
> ----- Original Message ----- 
> From: "Jim W7RY" <w7ry at centurytel.net>
> To: <writelog at contesting.com>
> Sent: Tuesday, October 28, 2003 9:35 PM
> Subject: [WriteLog] Fw: M2 Orion OR-2800 Rotor
>
>
> > Well just received my new Msquared OR-2800 rotor. Have it set up in the
> > shack.
> >
> > I can't seem to get it to work with Writelog. Works fine with Hyperterm.
I
> > can tell it where to go all day...
> >
> > I can see the data go out from the comport when I use Writelog, but the
> > rotor does not turn.
> >
> > Any ideas? Just searched the archives and no luck.
> >
> > Thanks and 73
> > Jim
> >
> > W7RY
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog at contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>