[WriteLog] 2nd rig control program with writelog

[Alfred J. Frugoli (KE1FO)]

I'm not talking about 2 rigs on 1 com port, I'm talking about 2 programs accessing 1 com port that has 1 rig attached.  Here's what I'm trying to do:

Writelog can set the frequency to a spot frequency, set splits, read the frequency, tune the frequency with the mouse wheel etc.  I want to also be able to control the filter settings, set the rit/xit etc.  To do this I need a program in addition to writelog (at this point at least).  

The question is can I do this (2 programs reading and writing 1 com port), or is there a plugin for writelog that allows incrased radio control.

Thanks.

73 de Al, KE1FO

----- Original Message -----
From: Georgek5kg at aol.com
Sent: 4/12/2004 11:34:12 AM
To: frugoli at worldlinkisp.com
Subject: Re: [WriteLog] 2nd rig control program with writelog

> In a message dated 4/12/2004 11:02:39 AM Eastern Standard Time, 
> frugoli at worldlinkisp.com writes:
> I'm assuming a 2nd program can't be running addressing the same com port (I 
> havn't tried this yet - but I'm making assumptions from previous experience).  
> Is there a solution for this (i.e. a plugin for writelog, or a way to tell 
> writelog to use an external program for rig control)?
> 1st and 2nd rigs must be on a separate comm ports.  No way around this as far 
> as I know.
> 
> Geo...
> 
> George Wagner, K5KG
> 941-312-9450
> 941-312-9460 fax
> 941-400-1960 cell
>