[WriteLog] RE: [Dx4win] Rig control for Yaesu FT-857 or FT-817

[Stan Staten]

I have been using it with the FT-897 and I think that is the same from a
control basis as the 857.  You might try it with the DX4WIN FT-897
settings.

73 Stan, N3HS

-----Original Message-----
From: dx4win-bounces at mailman.qth.net
[mailto:dx4win-bounces at mailman.qth.net] On Behalf Of N6KJ
Sent: Saturday, August 07, 2004 2:18 PM
To: dx4win at mailman.qth.net
Subject: [Dx4win] Rig control for Yaesu FT-857 or FT-817


I'm running DX4WIN version 6.03.  I could have sworn that a while back I
was able to get DX4WIN to communicate with my FT-817 and FT-857D, but
now I can't figure out how.  After switching the rig type to FT-1000MP
(while using my 1000MP) I was unable to set the rig type to something
that would work with my FT-857D.  There appear to be no rig type
settings for the 817 or 857D.  Anyone know what rig setting will work
(if any) with these two rigs?
_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win