[WriteLog] Writelog-CT17-Radios

[DougN1 at aol.com]

In a message dated 12/13/04 12:12:21 PM, k4gmh at arrl.net writes:

<< Hello Dick,

No solution to your problem, but get the same thing regarding "No 
Rig".  Unfortunately, once the "No Rig" shows up it stays until the Port 
Window is pulled down and selecting OK.  Then the radio is once again 
recognized.  The radio is an IC746 using a homemade CAT interface.  This 
problem only occurs with Writelog.  >>

For what it may be worth, here is my experience. I have a home brew interface 
with a 756 Pro. It worked perfectly with Windows 95. When I installed Windows 
98SE, I would frequently get the same condition as Mike explains above and 
could "fix" the same way. Now that I'm running XP professional, everything works 
perfectly again. The only change was the OS.  Go figure.   I only run WL, so 
don't know about any other applications.

Doug....K6HGF