[WriteLog] SO2R Setup for WL / MMTTY

[Jerry Pixton]

Al,

First you do not want to use the Mic inputs. That is a mono input. Use the 
Line Input. This is stereo and you can feed the Left from one radio and the 
right from the second radio.

Then with WL set up for two radios, you can bring up an instance of the 
MMTTY plug-in for each radio. You can then configure each MMTTY instance to 
the Right or Left channel as needed.

Most of us use two sound boards at this point. But it does work on just one 
sound board. In the Rttyrite windows just select MMTTY as the tnc.

You can even configure MMTTY to look at the same sound card and the same 
channel and use different profiles in MMTTY for better decoding.

Jerry, W6IHG



At 08:01 PM 12/23/2004 -0500, Aldewey at aol.com wrote:
>Can anyone point me to a link explaining how to setup WL and MMTTY for SO2R
>using the right and left Mic Inputs on a sound card.  I think I understand 
>the
>hardware setup but it's not clear to me how to set up WL and MMTTY.  Is there
>a particular Rev level of each I have to be at to make this work.
>
>Any suggestions appreciated as I get ready for the RU in January.
>
>73,
>
>Al, K0AD
>_______________________________________________
>WriteLog mailing list
>WriteLog at contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web:  http://www.writelog.com/

------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton at shentel.net
------------------------------------------