[WriteLog] Need help on SO2R CW on 2 COM ports - Results

[Jerry Flanders]

Just use QSK - no PTT required. Diodes should isolate the two parallelled 
key lines OK, if that is needed.

Jerry W4UK

At 17:17 1/10/04, Don Hill AA5AU wrote:
><snip>
>
>There was one suggestion that didn't make it to the reflector and I had 
>thought
>about this, was
>to parallel the CW keying from a single COM port to each rig.  It works if you
>command PTT with
>radio control, but I'm not comfortable with it.