[WriteLog] Original Rig Blaster and Voice Keying?

[Bob Naumann - N5NJ]

Thanks for all the replies.

Apparently, the mic has to be continually connected to the soundcard's mic =
input for this all to work.

I have done that, and thus far, I can record messages and the MSG#.WAV file=
s go where they should. When I press the F-Keys they play, but the output l=
evel is very, very low and not high enough to drive the radio at all - or i=
t's not going to the radio.  I know that something is wrong, but I have not=
 figured it out yet.  Also, I am getting a feedback that I think may be int=
ernal to the sound card as it is not affected by the mic being connected or=
 not.

The audio level is capable of going way too high when I do RTTY. ???

-Bob N5NJ

> ------------Original Message------------
> From: "Bob Naumann - N5NJ" <n5nj at gte.net>
> To: writelog at contesting.com
> Date: Sat, Jan-17-2004 11:41 PM
> Subject: [WriteLog] Original Rig Blaster and Voice Keying?
> =

> I've got everything working for RTTY and CW, and now I want to get the vo=
ice keying stuff going.
> =

> I'm using an old Rigblaster, and my mic audio does not get recorded.
> =

> Writelog is recording the .wav files when I do Shift-F2, Shift-F3 etc.  T=
he files are just recorded silence.
> =

> How will the mic audio get to the PC's sound card input and still transmi=
t the recorded wav files?
> =

> Bob N5NJ
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> =