[WriteLog] Packet wtih Writelog

[Pat CainKØPC]

Al,
There are a couple of places in the writelog.ini file that set up the 
packet connection to a TNC.

The [Ports] section sets the communication port speed, etc.

[Ports]
COM1:=9600,e,7,1,x
COM2:=9600,e,7,1,x
COM4:=9600,e,7,1,x
COM5:=9600,e,7,1,x
COM6:=9600,e,7,1,x


The [Packet] section sets which port is used for the TNC.

[PACKET]
PORT=6

Check to make sure these are set and match the settings on your TNC.

73,
Pat  KØPC


At 09:38 PM 1/24/2004 -0500, Aldewey at aol.com wrote:
>Newbie Question.
>
>Is there some trick to getting packet via a TNC to work with Writelog?
>
>My configuration is Windows 98 wtih COM1 connected to Radio and COM2
>connected to TNC.  This configuration works fine with NA and TR.  Also, I 
>am able to
>talk to the TNC via COM2 using Hyperterminal under Windows.
>
>However, when I select the packet window in Writelog and select COM2 nothing
>happens.  It is not clear to me if I need to do anything with the PORTS
>setting.  It looks like all you can select is Rig Control or CW control there.
>
>What am I missing?
>
>73,
>
>AL, K0AD