[WriteLog] Re: 756 question

[Georgek5kg at aol.com]

In a message dated 7/5/2004 12:07:52 PM Eastern Daylight Time,  
halken at comcast.net writes:

I know you are both a writelog and  Icom user – I have agreed to help a local 
here get his 756 Pro II all wired up  for contesting – but I don’t know much 
about the radio and want to have what I  need when I show up at his place. 
My real concern is the audio  interface.  Is there an audio input on the rear 
panel of the Icom?   How do you bring the sound card audio output into the 
rig at your station,  through a rear panel input or straight into the mic jack 
on the front  panel?  I plan to use a 1:1 isolation transformer, of  course. 
Also, do I remember that Icom has  a DC voltage floating on the mic input?  
If so, I guess I need a blocking  cap as well. 



Hal,
 
Yes I use both the 756Pro2 and WL.  However, I do not interface the  radio or 
WL to audio so I can't answer your questions about audio.  A good  source of 
info about this can be found on both the WL and 756Pro2  reflectors:
 
_writelog at contesting.com_ (mailto:writelog at contesting.com) 
_ic756pro2 at yahoogroups.com_ (mailto:ic756pro2 at yahoogroups.com) 
 
Also, you might try the k9jy.com web site devoted to WL info.
 
73, Geo...
 
 
 
George  Wagner, K5KG
941-312-9450
941-312-9460 fax
941-400-1960  cell