[WriteLog] CtCompatibleAccel

[George Johnson]

Mike,
I just now installed v10.48F on the two machines I just used in IARU 
CW.  In both cases, I let it find and "reuse" the existing WriteLog.ini 
file....  but I did back it up just in case  :-))
I had some kind of system software corruption in one machine so the update 
would not install via the setup program.  (Win 98SE).  It installed OK 
after a reboot of that machine.  The second machine installed OK on the 
first run of the setup program.

The CT acceleration keys seem to work fine on both machines.  I don't have 
your CqFunctionKey=1 line in my WriteLog.ini file but it still seems to 
find F1 as the CQ key.

I forget which OS you are using but both of these were different 300 MHz 
class machines; one AMD and the other Intel.  Both are running Win 98SE and 
they do seem to behave a little differently from time to time.

You might try to reassign your "old" WriteLog.ini file and see if it works 
OK.  If not, I guess it is a copy and paste job to transfer all the 
existing .ini data to the new one your system seems to like.
73, George .. W1ZT


At 12:28 PM 7/11/2004, Mike wrote:
>Hello,
>
>Started using V10.48F in the IARU (CW) and the F1 CQ function doesn't 
>work.   In V10.47 it did.
>
>Writelog.ini located in the C:.\WINDOWS folder has the 
>CtCompatibleAccel=YES  and CqFunctionKey=1.
>
>However, after renaming the Writelog.ini and opening up Writelog 
>(establishing a new Writelog.ini) the F1 key now works without the 
>CtCompatibleAccel==YES and CqFuntionKey=1 showing up in the new Writelog.ini.
>
>Any ideas on what is happening?
>
>         73,
>         Mike, K4GMH