[WriteLog] microHam USB to Rig interface questions?

[David E. Shelton]

Well it works perfectly now thanks for the help guys and to all that
replied. This is a great interface works well with WL and DX4WIN. 73
Des, N4IN

----- Original Message ----- 
From: "Bob Naumann - N5NJ" <n5nj at gte.net>
To: "David E. Shelton" <n4in at insightbb.com>
Sent: Tuesday, March 16, 2004 9:30 PM
Subject: Re: [WriteLog] microHam USB to Rig interface questions?


Des,

You set it up as you describe, with the rig and CW on the same port - in
this case com 5 - for one of them.  Remember that you have to set the baud
rate in Writelog to match your radios' baud rate - the control panel
settings don't matter.

Then you select PTT on CW port.

It should work.

Let me know what happens.

-Bob

> ------------Original Message------------
> From: "David E. Shelton" <n4in at insightbb.com>
> To: <WriteLog at contesting.com>, <support at microham.com>,
<om7zz at microham.com>
> Date: Tue, Mar-16-2004 6:07 PM
> Subject: [WriteLog] microHam USB to Rig interface questions?
>
> Hello all,
> I received my microHam USB interface today for my Icom rigs, IC-756PROII
and IC-746PRO. It works but I have not got the settings correct for Writelog
so that everything works as it should. I see the the device as I should
under the device manager in the control panel on my Windows XP PC. The COM
port is 5 and the port settings are 9600, 8, 1, N. I am having problems with
the CW, PTT, and rig being on the same COM port? I am not exactly sure how I
am supposed to have this setup. I would appreciate any help.
>
> 73,
> Des, N4IN
>
> David E. Shelton, RN
> University of Louisville
> School of Nursing
> FNP student
> St. Catharine College
> Adjunct/Clinical Instructor
> Des, N4IN
> david.shelton at louisville.edu
> n4in at insightbb.com
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>