[WriteLog] Re: CW Receiver - 160 Hz Low?

[Marc Ziegler, W6ZZZ]

From: "Marc Ziegler, W6ZZZ" <ziegler at accesscom.com>
> Folks say my CW transmit is 160 Hz high when I use the WriteLog CW Receiver
and
> tune in a signal exactly and then transmit. IC-756pro transceiver.

The answer is:
Align WriteLog Rttyrite with your transceiver's side tone. Since the IC-756pro
is at 600 Hz with the CW pitch knob in the middle I added the following lines to
WriteLog.ini:

   [Rttyrite]
   CW_RECV_FREQ=600
   CW_XMIT_FREQ=600

Problem solved!
Thanks to all the folks who answered off-line. See you in ARRL Sweepstakes CW.

   - Marc, W6ZZZ
   - P.S. I'm not sure that CW_RECV_FREQ is even a valid line, the Help file
only talks about CW_XMIT_FREQ, but WriteLog doesn't complain