[WriteLog] TS-480S Rig Control Woes

[Eric Hilding]

Tnx to all who responded.

For some bizarre reason, I had no COM ports showing under the [PORTS] 
section of the writelog.ini file (only two under the [RIGS] section).

So I manual edited the .ini file to add the following at the beginning of 
BOTH sections:

COM1:=4800,n,8,1,
COM2:=4800,n,8,1,
COM3:=4800,n,8,1,
COM4:=4800,n,8,1,

Special Tnx to Joe, K0BX for helping me resolve this.

However, if I change to another computer where COM1 thru COM4 are tied up 
with internal devices which may not be able to be changed, since the 
Writelog Setup | Ports options *only* include COM1 thru COM4, what would be 
the workaround?  With more folks going to USB-Serial adaptors, can the 
Writelog COM options be expanded?

73...

Rick, K6VVA