[WriteLog] Writelog-CT17-Radios

[Keith Regli]

I see a similar behavior on the Omni VI+ with a serial interface.  I always
thought it was a timing issue between clicking on the bandmap and polling
the rig frequency info.  

Keith Regli (K7KAR)
mailto:keith at kregli.com
http://www.kregli.com
 
-----Original Message-----

I also run an Icom IC-775DSP and IC-PW1 and have experienced this same exact
problem from the beginning.
...
73, Don AA5AU

-----Original Message-----

This is the first time I have had a problem with this and looking for some
advice.  I use Writelog (Latest version) with an IC-775DSP and a PW-1.  What
I experienced all weekend in WW was when I clicked on a spot I had to do
multiple clicks before it would put the spot in the entry window and change
the frequency on the radio.  What I noticed on the band map was that the
frequency would change immediately and then just as fast go back to the
original frequency.  I would have to click many times to get this to work.
I then tried it with the
PW-1 off and that seemed to fix the problem.  Frequency changes were
immediate. 
So, have I a bad CT-17?  I don't think so.  I changed the ports around and
it made no difference.  Any ideas, help, or incouragement would be
appreciated.
Note-this had worked before in multi-band contests and this weekend I was
single band.

Dick W7ZR
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/