[WriteLog] Writelog Problems

[K3SK]

I'm having the same problem using Windows 2K service pack 4.   I can't run
"RTTYRite" at all. Everytime I try to set up the sound board the program
crashes.   I'm using the latest release of WriteLog, which is the 1st
release I've purchased.

Dave

-----Original Message-----
From: writelog-bounces at contesting.com
[mailto:writelog-bounces at contesting.com]On Behalf Of Robert Carroll
Sent: Saturday, October 02, 2004 8:45 PM
To: 'Steve AI9T'; 'Ron k5dj'; writelog at contesting.com
Subject: RE: [WriteLog] Writelog Problems


Steve-

This is the same problem I have been in communication with Ron about.  I
cannot change modes without crashing the system.  Depending on just what
sequence I use I can get the run time error you get or a "RTTYRite MFC has
encountered and error and must exit."  Based on a request I have made for
info form others on the reflector who are experiencing this error, it
appears ALL have changed to SP2 just before seeing it.  It's not certain yet
but I made a case to Ron that it seems very likely this is an issue that has
arisen because of SP2.  In playing around here I have found exactly the same
behavior on 3 very different machines, all running SP2.  Interestingly
enough I revived a 10.3 era package from 2002 I believe and it does not show
the behavior.  The problem makes it very difficult to change to cw or to
change to different RTTY configurations, so I am hoping there will be a
solution soon.  One workaround seems to be to wipe out the RITTY section of
the ini file, restart (probably reboot) and set up RTTTRite using AFSK.  But
NEVER try to switch to another RITTY TTU type.  You can switch to a TNC etc,
however.  If you come up with a solution please let me know.


Bob W2WG

-----Original Message-----
From: writelog-bounces at contesting.com
[mailto:writelog-bounces at contesting.com] On Behalf Of Steve AI9T
Sent: Saturday, October 02, 2004 10:28 AM
To: Ron k5dj; writelog at contesting.com
Subject: [WriteLog] Writelog Problems

I'm having a problem with 10.49d.

I normally run writelog with the mmtty plugin and have been for some
time. Today I was going to switch over to CW mode. To do this I have to
click TU type and switch to soundboard afsk. Then I go to mode and
switch to CW. For some reason when I click soundbaord afsk I get a pop
up error with the path to

Runtime error

Program c:\ham\Writelog\Programs\RTTYRI~1.EXE
R6025
pure virtul function call

When the pop up goes away the Rttyrite window goes away too

I tried different ini files but doesn't seem to help. It has been awhile
since I used CW so I don't know when this might have started.

I have loaded SP2 to XP PRO a few weeks ago

I have attached my INI file for Ron

Thanks
--
73

Steve AI9T

http://www.ai9t.com

QSL via LOTW and EQsL



_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/