[WriteLog] Window XP and LPT CW

[Jim Johnson]

Hey Scott, 

That was it.  Thanks loads...

Jim/KC4HW
http://www.AlabamaQSOParty.org
Apr 29th, 2006
Yes, there is a Writelog Module for AQP.




On 9 Apr 2006 at 14:47, K7ZO (Scott Tuthill) wrote:

> Try the following --- worked for me.
> 
> Check your [PORTS] section in writelog.ini and you need the following
> : The addition is:
> 
> Find the [PORTS] section.
> Add this line:
> 
> CW_ON_PIN1=1
> 
> Scott/K7ZO
> ----- Original Message ----- 
> From: "Jim Johnson" <jimjohnson at allvantage.com>
> To: <writelog at contesting.com>
> Sent: Sunday, April 09, 2006 2:43 PM
> Subject: Re: [WriteLog] Window XP and LPT CW
> 
> 
> > Hey David/K6LL and Bill/AK0A (and the rest of the group)
> > 
> > This solve my problem with the LPT keying the transmitter.  
> > 
> > Now the CW is very choppy.  I have shutdown all the unused 
> > programs, ie AVG, BOClean, Internet connection...  the problems
> > appears to continue.  
> > 
> > I am using a wireless mouse, could that be the problem????
> > 
> > Any ideas ???
> > 
> > Thanks
> > 
> > Jim/KC4HW
> > http://www/AlabamaQSOParty.org
> > Apr 29th, 2006
> > 
> > On 9 Apr 2006 at 16:52, David Hachadorian wrote:
> > 
> >> 
> >> ----- Original Message ----- 
> >> From: "Jim Johnson" <jimjohnson at allvantage.com>
> >> To: <writelog at contesting.com>
> >> Sent: Sunday, April 09, 2006 4:30 PM
> >> Subject: [WriteLog] Window XP and LPT CW
> >> 
> >> 
> >> > Need a little help with the configuration...
> >> >
> >> > Writelog Version 10.57H
> >> >
> >> > Have Direct-IO version 4.4.271
> >> > Using this example contained in I have identified and 
> >> > include ports
> >> > 378, 278 and 3BC
> >> >
> >> > I found the WriteLog.ini in the WINDOWS directory but 
> >> > could not
> >> > see where to put the setup for LPTs
> >> >
> >> > LPT ports in WL.ini: LPT1=0x378, LPT2=0x0, LPT3=0x0
> >> >
> >> > In WriteLog Setup Port the areas for selecting the LPT for 
> >> > CW
> >> > keeying is grayed out....
> >> 
> >> 
> >> Try this method from k2qmf. It worked for me.
> >> 
> >> Dave Hachadorian, K6LL
> >> Yuma, AZ
> >> 
> >> --------------------------------
> >> Hello All,
> >> 
> >> I have spent many hours trying to get Direct I/O
> >> to work on my new computer so that I could send CW
> >> via my LPT port.
> >> The computer uses Windows XP.
> >> 
> >> Well I finally figured it out!!  I'm sure most already have
> >> gotten it to work but I'm not very computer literate.
> >> 
> >> Anyway here is the way to do it:
> >> 1 - Open the Direct I/O control panel.
> >> 2 - In the I/O Ports Tab enter the BEGIN and END address.
> >>       For LPT1 it is  378  and  37A.
> >> 3 - Click ADD button ( This is the step they left out)..
> >> 4 - Go to the SECURITY Tab
> >> 5 - Click BROWSE button and locate writelog directory.
> >> 6 - From there locate writelog\Programs\WriteL32.exe and 
> >> click OPEN
> >> 7 - Click ADD.
> >> 8 - Close Control Panel...
> >> 
> >> That's it!!  It works great....    Good Luck.
> >> 
> >> 73,  Ted  K2QMF
> >> 
> >> P.S. - Remember you must do step 3 or forgetaboutit...
> >> 
> >> _______________________________________________
> >> WriteLog mailing list
> >> WriteLog at contesting.com
> >> http://lists.contesting.com/mailman/listinfo/writelog
> >> WriteLog on the web:  http://www.writelog.com/
> >> 
> > 
> > 
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog at contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> 
>