[WriteLog] [Dxbase] IC-7000

[Gary Senesac AL9A]

Pete,

Sorry, I didn't think that you might not know the hex addresses for the
various IC-706 generations.  They are in the Radios.ini file in the DXB2006
folder.  The codes are as follows:

IC-706 = 48H (0X48 hex)
IC-706 MKII = 4EH (0X4E hex)
IC-706 MK11G = 58H (0X58 hex)

The codes in parentheses are the hex codes in Radios.ini file, but the codes
following the = sign are what the radio expects to have entered/selected via
the Initial set menu.  Depending on which radio driver you specify in DXB
Options change the default in your IC-7000 to match the default hex code for
that radio driver.   You should be good to go until the full IC-7000 driver
is released in a later edition of DXB.

Gary AL9A

----- Original Message ----- 
From: "Peter Dougherty (W2IRT)" <w2irt at comcast.net>
To: "Gary Senesac AL9A" <al9a at pobox.mtaonline.net>
Sent: February 23, 2006 8:33 PM
Subject: Re: [Dxbase] IC-7000


> At 22:39 02/23/06, you wrote:
>
> >Pete,
> >The IC-7000 will work with the IC-706 settings, but you must change the
> >default hex address of the 7000 to match that of a 706.
>
> Since I've never owned a 706 or any other Icom, could you please tell
> me where I could find this? I just assumed the settings were similar
> since the radios are somewhat related.
>
>
>
>
> - Peter
>
> W2IRT
>