[WriteLog] FW: Random transitions to transmit

[The Trench Family]

Never mind!  I figured it out.  There was a bunch of print job queued up.
Once I cleared them the out the problem is solved!

73 Bud AA3B

-----Original Message-----
From: The Trench Family [mailto:cwtrench at sprynet.com] 
Sent: Saturday, March 18, 2006 12:57 AM
To: 'writelog at contesting.com'
Subject: Random transitions to transmit

I have been using my LPT and Direct IO for CW keying for several years quite
successfully.  All of sudden, I am experiencing random transitions to
transmit.  The condition occurs approximately once every 45 to 60 seconds.
I see that the PTT signal (Pin 16 from the LPT) is being set by the
software.  I must hit escape or a message function key to clear the
condition.

I did not experience this problem until tonight.  I am currently using
version 10.57, but the problem is also present (tonight) using version
10.44.

The only change significant change I have made recently is the installation
of Turbo Tax.  All other hardware and software remains the same.

Any thoughts or advice?

Tnx,

73 Bud AA3B