[WriteLog] MMTTY Plug in module with writelog problem

[Don Hill AA5AU]

One more thing.  The screenshots used in the software generated FSK tutorial on rttycontesting.com need to be updated because
software generated FSK is now available on both the TxD and DTR pins of the adapter.  I'll update the tutorial when I have time.

73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com 

-----Original Message-----
From: writelog-bounces at contesting.com [mailto:writelog-bounces at contesting.com] On Behalf Of Gary Gross
Sent: Friday, December 21, 2007 10:28 PM
To: 'REFLECTOR writelog'
Cc: nccc at contesting.com
Subject: [WriteLog] MMTTY Plug in module with writelog problem

Hi gang.
 I have been having a problem getting the writelog MMTTY plug in module to work correctly for some time now. My original problem was
that no matter what I did MMTTY didn't transmit and receive on exactly the same frequency, there was usually about 60 Hz difference.
I deleted both MMTTY and the plug in module, reinstalled and reinstalled a new copy. Now MMTTY stand alone works absolutely perfect.
However, when I run the MMTTY plug in module through writelog the rtty signal sounds like its going too slow and my other radio with
a Kam TNC wont decode the signal, although it is on exactly the same frequency. I have tried reverse polarity with the same results.
IM running FSK through a USB port and once again if I switch back to MMTTY stand alone it works perfect. In the options, set-up
,Misc.,TX port pull down menu on the Plug in Module the second and third option for FSK or sound+FSk is greyed out, only sound is
available. In the MMTTY stand alone nothing is greyed out and FSK i  s selected. I have been trying for sometime to figure this out,
any help would be appreciated. Thanks. Gary. ke6qr _______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/