[WriteLog] Arrl RU

[Gary Senesac AL9A]

If I'm reading your message right you are concerned that you don't have a 
field for RST on tx.   If you look in the Call Entry window you will see the 
RST field already filled in with 59.  That is your default signal report. 
The RCVD field is where you enter the RST from the other station.  Again, 
most likely a 59 in contest exchanges.  In the Log window there is a field 
called SNT.  That is the RST report you sent - from the RST field in the 
Call Entry window.  Right next to it is a field called RST which is the info 
you entered in the RCVD field of the Call Entry window.  Clear as mud ain't 
it?

Gary AL9A

----- Original Message ----- 
From: "Rabbi Cy Stanway" <rabbicy at msn.com>
To: <writelog at contesting.com>
Sent: November 23, 2007 1:07 PM
Subject: [WriteLog] Arrl RU


>I am setting my WL for the RU contest and see that the log does not have an 
>RST fo tx. And what is the C on the right field?
> Rabbi Cy Stanway
> www.bethmiriam.org
>
>
> Sent from my Verizon Wireless BlackBerry.
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/