[WriteLog] Makrothen bugs
peter Jackson
peter.jackson17 at ntlworld.com
Sun Oct 14 12:22:20 EDT 2007
Closing down the rttywrite window then opening normally cures the high light
problem. I found if stations put a hyphen between locators gave me problems,
don't know why they do these fancy exchanges in contests.
73 Pete G3KNU
----- Original Message -----
From: "Don Cassel" <ve3xd at rogers.com>
To: "'Writelog Reflector'" <writelog at contesting.com>
Sent: Sunday, October 14, 2007 4:14 PM
Subject: [WriteLog] Makrothen bugs
>
> I worked the Makrothen RTTY contest this weekend and ran into a few
> problems
> in Writelog 10.61E. Some stations sent their grid with a hyphen as in
> FN03-FN03. When clicking on this it replaces the callsign in the QSO entry
> window. This is not the same behaviour I see in other contests.
>
> Calls in the Rttyrite window are never highlighted. Even those that are
> preceded with a DE. This is also behaviour not seen in most other contests
> although I did notice it happening quite often in the CQWW RTTY.
>
> Calls that appear in the bandmap from the cluster do not show when they
> are
> dups. This means it is necessary to enter them in the entry window to dup
> check before calling the station.
>
> Hopefully these problems can be fixed by next year.
>
> 73, Don VE3XD
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
More information about the WriteLog
mailing list