[WriteLog] Sending CQ on the other radio...

[Carsten Steinhofel]

Dale,

Not exactly what you want but if you use the %X macro at the
beginning of your CQ message, you only have to hit F1. (You
have to have hit Shift-up/down once to get the TX focus on
the CQ radio and the keyboard focus on the S&P radio). As
long as the TX focus is on the CQ radio, F1 is all you need
to start a CQ.

73 Carsten, DL1EFD


> -----Original Message-----
> From: writelog-bounces at contesting.com 
> [mailto:writelog-bounces at contesting.com] On Behalf Of Dale Martin
> Sent: Sunday, April 20, 2008 6:10 PM
> To: writelog at contesting.com
> Subject: [WriteLog] Sending CQ on the other radio...
> 
> 
> I'm back.  
> 
> I would like to be able to send CQ on one radio while 
> entering Exchange data from the other. 
> 
> In TRLog, I can program up an F-key message to do that: 
> ctl-p, ctl-a <message>  
> 
> I've read through/searched through the WriteLog manual 
> looking for a similar command or even a reference to the 
> function, but found nothing.  Did I miss it?  
> 
> I've also looked through the keymap list of commands to see 
> if there's something in it that will do that...nothing. 
> 
> Do I have to hit shift-up/down arrow, hit F1, hit 
> shift-up/down arrow again to make this happen, all the while 
> receiving and entering the exchange data?
> 
> 
> Thanks in advance,
> 
> Dale, kg5u
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/