[WriteLog] BROKEN CW WITH WL10.65 AND DIRECT-IO AS LPTDRIVER/INTERFACE

[Joe Subich, W4TV]

John, 

Is the keyer turned on in your radio?  

How is your CW interface connected?  If the emitter of the 
transistor is returned to pin 1, have you set CW_ON_PIN1=1 
in the INI file? 

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: writelog-bounces at contesting.com 
> [mailto:writelog-bounces at contesting.com] On Behalf Of John 
> and Mary Powell
> Sent: Saturday, February 02, 2008 2:18 AM
> To: writelog at contesting.com
> Subject: [WriteLog] BROKEN CW WITH WL10.65 AND DIRECT-IO AS 
> LPTDRIVER/INTERFACE
> 
> 
> I have recently re-installed WL, initially with v10.64 and 
> subsequently upgraded to 10.65.  Somewhat belatedly I 
> discovered that these versions do not support LPT keying and 
> as a result I installed Direct-IO (evaluation model 
> meantime). The problem - broken CW, generally on an 
> unintelligible nature. Is there someone on the Reflector who 
> has experienced this problem and if so would be kind enough 
> to suggest a cure. The re-installation has been made on a 
> HPCompaq NX5000 laptop, principally for portability reasons.
> Any assistance would be appreciatively welcome. 
> 
> 73 and thanks in advance
> John Powell. ZL1BHQ
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/