[WriteLog] WL ini file commands script

ve2lx ve2lx at sympatico.ca
Mon Jan 14 19:21:02 EST 2008


Dick 
thank you so  much for your rapid support
I did that before wrote the message to the groupe
but what a bou bou I made......?
I wrote the command script under RIGS section in WL.ini file......?
WHAT A MISTAKE!

I will send this message to the groupe because it is so important that for some commands ((( it is major to pay attention where to write them ))) in WL.ini file.
Your help is really aprreiciated
Gilles   VE2LX
============
----- Original Message ----- 
From: "Dick-w0raa" <w0raa at comcast.net>
To: "ve2lx" <ve2lx at sympatico.ca>
Sent: Monday, January 14, 2008 6:14 PM
Subject: Re: [WriteLog] LAPTOP PRT SEETING


> Gilles,  GO into WRITELOG.INI and under [Ports], enteer a command for the 
> COM port you wish to change.  If you want to change Writelogs COM3 and COM4 
> to COM6 & COM7, the command will be:
> 
> CommSlot3=6
> CommSlot4=7
> 
> The save the file and go back into WL.  When you get to the Ports screen you 
> will see:
> 
> Com1
> Com2
> Com6
> Com7
> 
> as your choices.  Hope that helps.
> 
> Dick
> W0RAA
> 
> 
> 
> ---- Original Message ----- 
> From: "ve2lx" <ve2lx at sympatico.ca>
> To: "witelog group" <writelog at contesting.com>
> Sent: Monday, January 14, 2008 2:13 PM
> Subject: [WriteLog] LAPTOP PRT SEETING
> 
> 
>>I want to hookup my laptop ( TOSHIBA SATELLITE BOUGHT LAST FALL ) port.
>> Normally there is no serial port and there is 4 USB.
>> I bought a  2 USB to serial port interface box (SIIG ) adaptor.
>> Installation work correctly and on computer startup it switch on/off 
>> rigbalster plus but no TX on macros...
>> but intallation gave port 6 and 7 when WL setup show 1 to 4 serial and Lpt 
>> 1 to 3.
>> in control panel I changed both to 1 and 2 restart but it does'nt see the 
>> pro3 ct-17 inteface for freqs & bands noer PTT.
>> I would prefer to use com 1 and 2 which seems to be available on control 
>> panel port change but if I must use 6 or 7 OK.
>>
>> How do we do that...?I seen we can address higher port number to WL setup 
>> main page but I lost it recently.
>> I will use my laptop on cmming small expedition.
>>
>> Can someone give an help
>>
>> Gilles   VE2LX
>> ve2lx at sympatico.ca
>> ==============
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/


More information about the WriteLog mailing list