[WriteLog] Cut Numbers

[Hal Kennedy]

Several comments:
First, cut numbers only work in conjunction with the % key in the F
messages.  So, if you have %3 in F3 and press F3 and it is going to send
serial number ONE, it will sent T-T-1.
Second, there is no reason to define 1 through 8 as themselves.  You can
delete those lines.
Third, defining 9 and N is a bad idea, as in certain combinations of
serial numbers you really want to send the nine.  For signal reports,
put 5NN into the F key message and get your signal report handled that
way.

My .ini file looks like this:

[Cut-Numbers]
0=t



That's it - 
73
Hal
N4GG


-----Original Message-----
From: writelog-bounces at contesting.com
[mailto:writelog-bounces at contesting.com] On Behalf Of John Muzyka
Sent: Sunday, March 16, 2008 3:04 PM
To: writelog at contesting.com
Subject: [WriteLog] Cut Numbers

Can some one just help me out with this, I cant find it in the archives
and I know it will be how its set up in the 1st line, but my cut numbers
dont work, take a look at them below taken from my .ini file
   
  [Cut-Numbers]
0=t
1=1
2=2
3=3
4=4
5=5
6=6
7=7
8=8
9=N
   
  What is wrong??
  Cheers
  John G4RCG

       
---------------------------------
 Rise to the challenge for Sport Relief with Yahoo! for Good
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/