[WriteLog] Cut Numbers

[Art Searle W2NRA]

To get cut numbers for just the Zero and the 9 this worked for me:

[Cut-Numbers]
0=T
9=N

Is there any way to get cut numbers only on leading zeros?

73 Art W2NRA
"Keep to the Code!"
w2nra.com
----- Original Message ----- 
From: "Hal Kennedy" <halken at comcast.net>


> Several comments:
> First, cut numbers only work in conjunction with the % key in the F
> messages.  So, if you have %3 in F3 and press F3 and it is going to send
> serial number ONE, it will sent T-T-1.
> Second, there is no reason to define 1 through 8 as themselves.  You can
> delete those lines.
> Third, defining 9 and N is a bad idea, as in certain combinations of
> serial numbers you really want to send the nine.  For signal reports,
> put 5NN into the F key message and get your signal report handled that
> way.
> 
> My .ini file looks like this:
> 
> [Cut-Numbers]
> 0=t
> 
> 
> 
> That's it - 
> 73
> Hal
> N4GG
> 
> 
> -----Original Message-----
> From: writelog-bounces at contesting.com
> [mailto:writelog-bounces at contesting.com] On Behalf Of John Muzyka
> Sent: Sunday, March 16, 2008 3:04 PM
> To: writelog at contesting.com
> Subject: [WriteLog] Cut Numbers
> 
> Can some one just help me out with this, I cant find it in the archives
> and I know it will be how its set up in the 1st line, but my cut numbers
> dont work, take a look at them below taken from my .ini file
>   
>  [Cut-Numbers]
> 0=t
> 1=1
> 2=2
> 3=3
> 4=4
> 5=5
> 6=6
> 7=7
> 8=8
> 9=N
>   
>  What is wrong??
>  Cheers
>  John G4RCG