[WriteLog] no cw or mode readout

[Joe Subich, W4TV]

microHAM Router does not block any data between the 
radio and WriteLog.  The Omni VII has two CAT modes - 
one is "native" the other is a modified mode that 
supports SteppIR antennas and the CT logging program.  
Check to see that you have selected to the correct 
protocol for WriteLog. 
 



> -----Original Message-----
> From: writelog-bounces at contesting.com 
> [mailto:writelog-bounces at contesting.com] On Behalf Of Roger Wise
> Sent: Saturday, October 11, 2008 10:41 AM
> To: WriteLog at contesting.com
> Subject: [WriteLog] no cw or mode readout
> 
> 
> I am running Vista.  Rig is Omni VII. Writelog 10.68F.  
> Microham Device Router Version 7.1.5 11250. Problem is this.  
> I can read the freq. and mode change on the router screen but 
> only the freq. in Writelog.  It will only give me dits when 
> keyed.  I have it set for winkey .  Question is there a CI-V 
> setting needed in microham in order to forward the mode?  At 
> an end. Thanks in advance. Rog KI0F