[WriteLog] DVK on ACC-2 Kenwood TS-2000

[Joe Subich, W4TV]

> I think the kenwood wants to see PTT on the ACC-2 jack, and 
> not the rig's serial port for things to work right.

Yes.  In order to take audio on ACC2 (PKD, Pin 11), the TS-2000 
and most of the other current/recent Kenwood transceivers will 
require PTT on ACC2 (PKS, pin 9).  The microphone input requires 
the use of front panel PTT or SS, Pin 13, of ACC2.  

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: writelog-bounces at contesting.com 
> [mailto:writelog-bounces at contesting.com] On Behalf Of steve
> Sent: Tuesday, February 24, 2009 12:13 PM
> To: WriteLog at contesting.com
> Subject: [WriteLog] DVK on ACC-2 Kenwood TS-2000
> 
> 
> I'm trying to get DVK to  work via the rear ACC-2 13 pin DIN 
> jack on a 
> Kenwood TS-2000.  Rig control is on comm1 and Rascal 
> interface is connected 
> to comm7.   The interface works fine on comm 7 when running 
> FSK RTTY from 
> Writelog,  but I can't get it to do DVK.
> 
> I think all radio menus are correct, as I can go to Digipan 
> and have it TX 
> on comm 7 via the ACC-2 jack.
> 
> In writelog, I have  "Windows Sound Board" selected for DVK, 
> but it seems 
> that "None" is checked for DVK port, and I can't get it to 
> uncheck or move 
> the check to any other port.
> 
> I think I'm getting in over my head, CW, rig control, and FSK 
> all work fine 
> and I'd hate to screw  these things up.   I think the kenwood 
> wants to see 
> PTT on the ACC-2 jack, and not the rig's serial port for 
> things to work 
> right.
> 
> Anyone using a similar setup?
> 
> tnx and 73, Steve KW3A
>  
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com 
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/