[WriteLog] Can't choose "ComTxD(FSK) in WL's MTTY!!

[Steve AI9T]

Make sure the com port is selected under the TX tab in the MMTTY setup. 
If not that problem will occur.

GL

-- 
73

Steve AI9T

http://www.ai9t.com

QSL via LOTW and EQsL

On 11/10/2010 7:09 AM, John Bastin wrote:
> On Nov 9, 2010, at 23:36:09, Ray Day wrote:
>
>> BUT NOW, as I am setting things up, I can only choose "Sound" in the
>> MISC Tab of the embedded WL-plugin MMTTY Option / Setup screen.
>> "ComTxD(FSK)" is greyed out.
>>
>> Using WL 10.79 (Aug 2010) and the WL-recommended MMTTY version for
>> use inside WL installed earlier - and it seemed happy with WL. Worked
>> fine last time.
> [snip]
>
>> All seems as it was and should be, but I can't select ComTxD(FSK) on
>> the MMTTY Setup Misc tab.
> I recently (as in, last week) upgraded from WL 10.65d which I'd been running for a long time to 10.81F. I figured this was a good time, it gives me two or three weeks to straighten out any glitches before CQ WW.
>
> I hadn't looked at the RTTY side but after reading this message I decided to check it out. I brought up a RTTY contest setup and looked through all the  settings. I'm happy to report that it sets up on ComTxD(FSK) just fine and sends RTTY with no problem. I'm running MMTTY 1.66g.
>
> The radio is an FT1000MP, the system is Windows XP SP3.
>
> Hope this helps.
>
> 73,
>
> John K8AJS
> jbastin at sssnet.com
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>

-- 
73

Steve AI9T

http://www.ai9t.com

QSL via LOTW and EQsL