[WriteLog] Erratic CW - it's baaack!

[Stephen Colello]

I have not been able to get my Winkey to work with Wrtielog 10.84 at 
all--NADA. Sends the letter "O" about every 20-30 seconds. Also, my messages 
are not correctly sent and if the "O" decides to send--then all is lost. 
Keyer works great with DXbase--as it always had. Any advice would be 
appreciated.

Steve
KA2KON

----- Original Message ----- 
From: "Gary AL9A" <al9a at mtaonline.net>
To: "Writelog Reflector" <writelog at contesting.com>
Sent: Saturday, April 09, 2011 4:09 AM
Subject: [WriteLog] Erratic CW - it's baaack!


> Just ran a few contacts in the JA Int'l DX CW Contest and again am
> experiencing erratic cw sending with my MK II keyer.  Had this problem a
> version or two ago with WL and supposedly the latest update, V10.84D, 
> fixed
> the problem.  However I am again experiencing the problem.  In my CQ 
> message
> the word "test" usually comes out "t est".  Sometimes it's ok, but mostly
> not.  Also my thank you message, "tu al9a", often sounds like "tu  al9a"
> with an elongated space between the tu and my call.  Anyone else notice 
> this
> problem still present in 10.84D?
>
> 73,
> Gary AL9A
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/