[WriteLog] Erratic CW - it's baaack!

[Gary AL9A]

I just tried the work around suggested by Ed W0YK.  Went to Setup/Ports and 
as soon as the window opened hit OK to close it without doing anything.  All 
of a sudden WL stopped sending erratically and the CW went back to normal. 
Incidentally, I forgot to mention in my first post that the Rittyrite screen 
would not print any of my stuff being sent.  After doing the Ports work 
around thing suddenly my transmissions started showing up on the Rittyrite 
screen.  Go figure!

73,
Gary AL9A


----- Original Message ----- 
From: "K2NV" <k2nv at arrl.net>
To: "Writelog Reflector" <writelog at contesting.com>
Sent: April 09, 2011 5:13 PM
Subject: Re: [WriteLog] Erratic CW - it's baaack!


>I had the same problem under WinXP.  I went back to 10.80F and it
> works fine.  Whatever is going on has something to do with program
> changes since 10.80.
> You will have to go back to 10.77 FULL and upgrade to 10.80F if you
> have it.
> It's not us.  N1MM works fine!
>
> Tony
> K2NV
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/