[WriteLog] Band Setup menu

[Georgek5kg at aol.com]

Hello Mark,
 
After much searching on how to edit the sub bands, I finally found a  
reference to the edit sub bands program by searching the reflector  messages.  
Once I found that in the writelog program directory, I used  the Edit 
sub-bands program to edit the phone portion of 80m to allow fone  contacts from 3600 
to 4000 khz.  However, the change was not  recognized by the Ohio Qso Party 
module.  
 
I had worked some guys on fone on 3650 khz, and had to change the frequency 
 in the log entry to 3755 khz in order for the module to count the qso as 
"in  band".  
 
I must have spent 2 hours researching this problem.  I found the WL  
documentation to be of little help.  However, thanks to you and another  fellow on 
the reflector, I am now a happy camper, hi.
 
73 and many tnx, Geo...
 
George  Wagner, K5KG
941-400-1960 cell  

 
In a message dated 8/28/2011 1:47:26 P.M. Eastern Daylight Time,  
k6ufo at arrl.net writes:



Hi George, It's not INSIDE the Writelog program. Don't run  the program.
It's on the Programs menu when you go to the START menu,  Writelog V10,
Edit sub-bands.

Mark Aaker  K6UFO


from
[Georgek5kg] [Permanent Link][Original] 
To:  writelog at CONTESTING.COM, support at writelog.com 
Subject: [WriteLog] Band  Setup menu 
From: Georgek5kg at aol.com 
Date: Sun, 28 Aug 2011 12:37:43  -0400 (EDT) 
List-post:  <writelog at contesting.com">mailto:writelog at contesting.com>  
WriteLog documentation describes a Band Setup menu.  However, I  cannot 
find Band Setup in the application.  Where is  it?

George  Wagner, K5KG
941-400-1960  cell
_________________________________