[WriteLog] Writelog 10.84D & Icom 775DSP with Windows 7

[Gary AL9A]

In Port Setup change CommPTT to NO.

73,
Gary AL9A

----- Original Message ----- 
From: <nx0i at aol.com>
To: <WriteLog at contesting.com>
Sent: March 23, 2011 5:48 AM
Subject: [WriteLog] Writelog 10.84D & Icom 775DSP with Windows 7


> Anyone,
>
>
>
>      I have been using Writelog for several years and just recently 
> installed version 10.84D on a new PC running Windows 7 Pro.
>      The problem I am having and I am having the same problem with N1MM is 
> that I cannot get Writelog to see my ICOM 775.
>      I am using a Serial to USB converter for my CT-17.  Icom is assigned 
> to Com2 9600,n,8.1,x in both my PC & Writelog.ini file.
>      My radio is assigned to 9600 baud & 46h address.  These settings are 
> working great with DXBASE 2007.  It controls the radio with no problems.
>      When I go into ports on Writelog and tell it Com2 - 
>  ICOM775 -9600baud - polling - Sync  it comes up and says "NO RIG!"
>      I have also tried different baud rates 4800, 19200 etc. with no 
> success.
>      I have set everything up from the setting in my old XP machine and 
> like I said DXBASE2007 see's my radio but not Writelog.
>      I have edited the correct Writelog.ini file, not the one in the 
> Windows folder and when I make changes, it seems to be seeing the changes.
>      I am also using a Signalink & Winkeyer2.  These are working with no 
> issues but not in Writelog.
>      Any suggestions would be greatly appreciated from a long time 
> Writelog user.
>
>
>      Jerry,  NX0I
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/