[WriteLog] W/L & MMTTY

[Tom Shelton]

That makes sense.

I knew something was set wrong in W/L when I was able to run MMTTY in the 
stand-alone mode.  Because one of the symptoms of the problem was that the 
rig was being keyed (but no modulation was evident), my troubleshooting was 
aimed at the lack of modulation.  One of the pieces of advice I received was 
to connect the PTT to the ACC2 port (I forget which pin).  I checked my 
SignaLink info and found that it was connected, but the whole thing got me 
thinking about PTT.  So, without expecting a change, I disabled the W/L PTT 
for that radio, and voila...   In short, I'm ready for the next RTTY 
contest.

Tom, AB3IC, BSCS, MAS, PhD dropout

-----Original Message----- 
From: Jim Reisert AD1C
Sent: Sunday, January 15, 2012 10:13 AM
To: Tom Shelton
Cc: [WriteLog]
Subject: Re: [WriteLog] W/L & MMTTY

On Sat, Jan 14, 2012 at 5:36 AM, Tom Shelton <gl1800winger at verizon.net> 
wrote:

> I finally got things working.  The resolution of the problem was simpler
> than expected.
>
> All I did was un-select the PTT option from the rig under the "ports" 
> menu,
> and everything started to work as advertised.
> I can't explain how or why - it just works...

It works because MMTTY always controls PTT whether it's run
stand-alone, or in conjunction with WriteLog.  WriteLog should *not*
control PTT when also using MMTTY.

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us