[WriteLog] WriteLog Digest, Vol 115, Issue 19

Sat Jul 28 12:36:23 PDT 2012

I too have requested this but to no avail.  It is really time consuming and 
somewhat irritating to have to reconfigure each time I go to writelog. The 
comports and soundcards get mixed up and it sometimes takes me up to 30 
minutes to get it corrected.  To me this is really a bad flaw that needs 
correcting and I'm glad someone brought this up.

Nick
w4gkm

-----Original Message----- 
From: writelog-request at contesting.com
Sent: Saturday, July 28, 2012 2:00 PM
To: writelog at contesting.com
Subject: WriteLog Digest, Vol 115, Issue 19

Send WriteLog mailing list submissions to
writelog at contesting.com

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/writelog
or, via email, send a message with subject or body 'help' to
writelog-request at contesting.com

You can reach the person managing the list at
writelog-owner at contesting.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of WriteLog digest..."

Today's Topics:

   1. Re: Can't save config with RTTY clone window (Gary AL9A)
   2. Re: Can't save config with RTTY clone window (Ed Muns)
   3. Re: WriteLog 11.06 Released (Steve GW4BLE)
   4. Re: WriteLog 11.06 Released (Steve GW4BLE)

----------------------------------------------------------------------

Message: 1
Date: Fri, 27 Jul 2012 15:29:00 -0800
From: "Gary AL9A" <al9a at mtaonline.net>
Subject: Re: [WriteLog] Can't save config with RTTY clone window
To: "Writelog Reflector" <writelog at contesting.com>
Message-ID: <3DE0AECC9EB3451B83DBF8B22DB49345 at AL9APC>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original

Jim,

Don't just shut WL down with all those Rttyrite windows open.  Try closing
the clone window first before shutting down WL.

73,
Gary AL9A

----- Original Message ----- 
From: "Jim N7US" <n7us at arrl.net>
To: "Writelog Reflector" <writelog at contesting.com>
Sent: July 27, 2012 9:18 AM
Subject: [WriteLog] Can't save config with RTTY clone window

>I have WL set up for two radios (actually one K3 with the subreceiver).  I
> have a Rttyrite window set up for each radio plus a cloned receive window
> for radio #1 that uses a DXP38 for a total of three decoding windows.
>
> All of that works fine, but when I restart the program the cloned DXP38
> window "thinks" it's the Rttyrite window for radio #2 instead of the clone
> for #1.  I have to change the TU type to MMTTY and the COM port to the
> second TX port for radio 2 and reopen a cloned window for the DXP38 on
> radio
> #1.
>
> Incidentally, the MMTTY control panel for MMTTY on radio #2 is set to
> "always on top" but I can't see how to change that.
>
> Am I doing something wrong?
>
> Many thanks.
>
> 73, Jim N7US
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/

------------------------------

Message: 2
Date: Fri, 27 Jul 2012 16:43:03 -0700
From: Ed Muns <w0yk at msn.com>
Subject: Re: [WriteLog] Can't save config with RTTY clone window
To: <n7us at arrl.net>
Cc: 'Writelog Reflector' <writelog at contesting.com>
Message-ID: <BLU0-SMTP449863D8C308220052BFE2790C10 at phx.gbl>
Content-Type: text/plain; charset="us-ascii"

WriteLog only saves two Rttyrite window configurations regardless of how
many you set up, assuming you do a Save Configuration.  You'll note in the
writelog.ini file there are only two Rttyrite sections.  If you setup more
than two Rttyrite windows the second configuration section sometimes ends up
being a mixture of parameters for two or more windows.

The net result is that you have to re-setup all your Rttyrite windows every
time you load WriteLog.  Two years ago, I submitted a request to fix this,
e.g., provide for many more Rttyrite sections in writelog.ini, but nothing
has been done yet.  There may not be enough of us using more than two
Rttyrite windows to justify a fix at this time.

Ed W0YK

Jim, N7US, wrote:
> I have WL set up for two radios (actually one K3 with the
> subreceiver).  I have a Rttyrite window set up for each radio
> plus a cloned receive window for radio #1 that uses a DXP38
> for a total of three decoding windows.
>
> All of that works fine, but when I restart the program the
> cloned DXP38 window "thinks" it's the Rttyrite window for
> radio #2 instead of the clone for #1.  I have to change the
> TU type to MMTTY and the COM port to the second TX port for
> radio 2 and reopen a cloned window for the DXP38 on radio #1.
>
> Incidentally, the MMTTY control panel for MMTTY on radio #2
> is set to "always on top" but I can't see how to change that.
>
> Am I doing something wrong?

------------------------------

Message: 3
Date: Sat, 28 Jul 2012 15:12:48 -0000
From: "Steve GW4BLE" <steve.gw4ble at btconnect.com>
Subject: Re: [WriteLog] WriteLog 11.06 Released
To: "'Steve Woodruff'" <steve at n9oh.com>, "'Writelog Reflector'"
<writelog at contesting.com>
Message-ID: <001b01cd6cd3$737af670$5a70e350$@gw4ble at btconnect.com>
Content-Type: text/plain; charset="us-ascii"

Well, good job I'm not serious about the IOTA contest !

Problems straight away with 11.06A

Immediately get :

'Writelog Sound Error on Echo Microphone" - Capture thread exception : No
common format available.

But more importantly - I've lost frequency control of the radios. Neither
radio can be activated.

Using Windows 7, 64bit,  microham MK2R+ with FTDX5000MP for radio 1, and
FT2000 for radio 2.  Control with the microham is working fine with other
software , unless I'm doing something wrong,  problem seems to be with
Writelog and 11.06A.

Steve
GW4BLE

-----Original Message-----
From: writelog-bounces at contesting.com
[mailto:writelog-bounces at contesting.com] On Behalf Of Steve Woodruff
Sent: 26 July 2012 12:43
To: Writelog Reflector
Subject: [WriteLog] WriteLog 11.06 Released

Hi Folks!

WriteLog version 11.06 is a free upgrade for anyone who has purchased the
full version of WriteLog since July, 2011.  This excludes the "Newbie"
version, which does not include any free upgrades.  If you are running an
earlier version, go here to purchase a new registration code:
http://writelog.com/ordering

WriteLog 11.06 includes the following new features/fixes:

* Update for IOTA Rules -- needed for this coming weekend!

WriteLog 11.05 includes the following new features/fixes:

* Audio Review Set Directory button works on Vista/Win7
* Fix crash in All Asia module on receipt of certain out-of-band spots.
* Fix failure to log Operator name.
* Extend packet window width out to 1024 characters (was 80)
* Add CWPTTIDLE setting to CW PTT dialog.
* Update for SCQP rules.
* Fix IARU bug introduced after last year's contest.

The latest software can be downloaded here:
http://writelog.com/downloads/writelog-versions

Thanks,

Steve N9OH & Wayne W5XD
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

------------------------------

Message: 4
Date: Sat, 28 Jul 2012 17:37:27 -0000
From: "Steve GW4BLE" <steve.gw4ble at btconnect.com>
Subject: Re: [WriteLog] WriteLog 11.06 Released
To: "'Steve Woodruff'" <steve at n9oh.com>, "'Writelog Reflector'"
<writelog at contesting.com>
Message-ID: <000b01cd6ce7$a805a5c0$f810f140$@gw4ble at btconnect.com>
Content-Type: text/plain; charset="US-ASCII"

OK, finally got it sorted, but never had to configure the 'log frequency of
QSOs' following an upgrade before.

...... and the 'capture thread exception' error measure still occurs....

Steve
GW4BLE

-----Original Message-----
From: writelog-bounces at contesting.com
[mailto:writelog-bounces at contesting.com] On Behalf Of Steve GW4BLE
Sent: 28 July 2012 15:13
To: 'Steve Woodruff'; 'Writelog Reflector'
Subject: Re: [WriteLog] WriteLog 11.06 Released