[WriteLog] WKUSB & WriteLog

[Jim McDonald]

Noel,

My writelog.ini has:

[Winkey]
KeyMode=0
Paddleswap=1
PaddleWatchdog=1

The Paddleswap=1 is due to my use of a Begali paddle.

In the Port Setup tab be sure to select K1EL Winkeyer2 as the CW keyer type.
I have PTT Control set to None (e.g., QSK), as I don't have the WK PTT
connected, but I have used the "On LPT pin 16/COMM RTS".

Can you send OK using a paddle connected to the WKUSB?

73, Jim N7US



-----Original Message-----
From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of Noel
Zeibari
Sent: November 01, 2012 08:59
To: writelog at contesting.com
Subject: [WriteLog] WKUSB & WriteLog

Hi All,

I assembled WKUSB few months ago, it is working flawlessly with MixW,
DX4Win, N1MM and N3FJP programs, the setup is intuitive no problems at all.
However, with WL I've been struggling getting it to send canned CW, every
time I push a button it sputters incoherent gibberish.

Here is my setup:
Rig is a Yeasu 897D
Cat is on USB Com 7
WKUSB on USB Com 8

In WL CWPTT, tried On LPT, None [e.g. QSK], Command rig on Com port= Same
results.
I searched the archives for help, none helped.

Can some one help me? What else I can change in the .ini file to get it
going?
I 've been using WL since 1997 with the simple CW interface cable, I just
don't want to go back to it.

73, Noel (OM) N3NZ