[WriteLog] Software Question

[Gary AL9A]

It's not just V 11.04A, WL has done this for years over several different 
versions.  I think it is related to the amount of data queries flowing over 
the communication bus line.  In my experience the CAT link is never broken, 
just a momentary pause because some data packet didn't make it through as 
expected.

73,
Gary AL9A


----- Original Message ----- 
From: "Anthony (N2KI)" <n2ki.ham at gmail.com>
To: "Writelog" <writelog at contesting.com>
Sent: October 01, 2012 3:38 PM
Subject: [WriteLog] Software Question


>I saw something interesting happening with WL version 11.04A during the
> CQWW this past weekend.  The QSO entry box has the radio tab on the left
> side and it displays the current frequency displayed on my VFO.  So the
> software is communicating with the radio and vis-versa as the band map 
> also
> shows the frequency.  After I transmit a macro, the frequency display on
> the tab in the QSO entry box changes to "No Radio!" for a couple of 
> seconds
> and then it returns to the proper VFO readout.  In the RADIO menu setting
> of WL I have 1 radio selected.  Does the software somehow think I should 
> be
> running two radios?  Any suggestions?
>
> Regards,
>
> Anthony J. Cioffi (N2KI)
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/