[WriteLog] Hardware Generated FSK

[Ed Muns]

Steve AI9T wrote:
> I'm using the Microham MKII. Is there anyway to turn off the 
> Hardware Generated FSK in this version of Writelog? I would 
> rather be able to choose my port.

If you use MMTTY as your main decoder and therefore your encoder for
transmit, then simply select 'None' on the Rttyrite Port menu and then go to
the MMTTY Options TX tab to set your FSK/PTT COM port.

> This just transmits way to 
> slow. I have tried ever configuration I can think of and I 
> can't get it to work correctly. You can see it's not right in 
> the RTTYRITE window just the way the text goes across the 
> screen when you send.

Joe will have to address this.  The problem is between Rttyrite Hardware
generated FSK and microHAM Router.  There is no speed issue with direct COM
port FSK/PTT keying.
 
>   I reinstalled my regular MMTTY Plugin back into WL.

This was not necessary because either MMTTY FSK or Rttyrite FSK can be
selected by virtue of the choice made on the Rttyrite Port menu.  (Either
'None' or a COM port number.)  However, MMTTY Plug-in and the XMMT.ocx
interface can happily coexist.  The risk is confusion over which items on
which menus to tick in order to get what you want.

> I remove all the rttyrite sections from WL ini then I can bring 
> up WL set the TU Type to the old MMTTY plugin. Then close WL 
> and reopen,, then open a RTTYRITE window. If I try to go to 
> TU Type again there is nothing but a blank pull down menu. 
> The RTTYRITE freezes and I have to shut it down from the taskbar.

Try deleting all Rttyrite sections in writelog.ini again.  You may not have
deleted all of them or maybe not in the active writelog.ini file.  be sure
to exit WriteLog, then delete the Rttyrite ini sections, then restart
WriteLog.

Ed W0YK